德國wika電接點溫度表S5550+831.22 威卡電接點溫度計S5550+831.21
威卡電接點溫度計S5550+831.1 威卡電接點溫度計S5550+831.2
wika電接點樣式及性能
Inductive contact model 831
■ Suitable for use in hazardous areas with corresponding
control unit (model 904.xx)
■ Long service life due to non-contact sensor
■ Low influence on the indication accuracy
■ Fail-safe switching at high switching frequency
■ Insensitive to corrosion
■ Also available in safety version
■ Up to 2 switch contacts per measuring instrument
Electronic contact model 830 E
■ For direct triggering of a programmable logic controller
(PLC)
■ 2-wire system (option: 3-wire system)
■ Long service life due to non-contact sensor
■ Low influence on the indication accuracy
■ Fail-safe switching at high switching frequency
■ Insensitive to corrosion
■ Up to 2 switch contacts per measuring instrument
Switching function
The switching function of the switch is indicated by index 1
or 2.
Model 8xx.1: Normally open (clockwise pointer motion)
Model 8xx.2: Normally closed (clockwise pointer motion)
For further information on switch contacts, see data sheet
AC 08.01
Other versions
■ Contacts fixed, without contact adjustment lock
■ Contact adjustment lock leaded
■ Contact adjustment key fixed
■ Connector (instead of cable or cable socket)
德國wika電接點溫度計
所有需要在本地顯示過程壓力、同時又必須監控閾值的應用都是帶開關觸點的溫度計的用武之地。開關觸點會根據顯示測量儀表的指針位置接通或斷開電路。如果讀數遠超或低于設定值,就會觸發報警,這就是所謂的“報警觸點”。觸點壓力表也可用于啟動、停止或開關過程。
TGS55電接點溫度計的應用
控制和調節工業過程
監控工廠和切換電路
化學工業、石油化工業、工藝技術和食品行業
適用于腐蝕性介質

TGS55電接點溫度計的功能特性
可靠性高,使用壽命長
通用應用
不銹鋼制外殼和探桿
帶電感式電接點的儀表,可在危險區域使用
電接點儀表,適用于PLC應用
TGS55電接點溫度計的描述
所有需要在現場顯示過程溫度,同時又必須切換電路的應用都可以使用該帶電接點的雙金屬溫度計。
電接點開關(也稱“報警電接點”)可根據測量儀表的指針位置接通或關斷電路。電接點開關在全量程范圍內可調。儀表指針(實際值指針)可在整個量程范圍內自由轉動,不受設置的影響。
設定指針可使用一個可插拔的鑰匙(安裝在接線端子盒上)從儀表窗口進行校正。
電接點開關不僅包含多個電接點,而且可以設置單個設定值。當實際值指針超過或低于設定值時,電接點便會進行切換。
電接點開關包括電感式電接點和電子式電接點。其中電感式電接點可用于危險區域。電子式電接點可用于開關可編程序邏輯控制器(PLC)。




































凤山县|
台湾省|
株洲市|
建昌县|
敖汉旗|
个旧市|
海南省|
北辰区|
黎川县|
锦屏县|
金山区|
聊城市|
宾阳县|
广宗县|
旌德县|
庆城县|
汝南县|
喜德县|
育儿|
宝丰县|
武冈市|
沁阳市|
桃源县|
宁陵县|
遂昌县|
张北县|
紫阳县|
马尔康县|
夹江县|
竹山县|
松阳县|
沁水县|
富川|
南和县|
丘北县|
博罗县|
奈曼旗|
梁河县|
武城县|
哈巴河县|
思茅市|