| Screw tightening control |
| ● DIGITAL TORQUE DRIVER DID-4M |
![]() |
| (1) Unify the display sectiona frame. It became stronger. (2) Display Measurement Mode, Unit, Etc. on Display Section. (3) Data Output is USB Form. (4) Prepare each button in accordance with operation. Button operation became simple |
| *The torque screwdriver is Ergonomiclight weight, yet ruggedly constructed *Available in: lb-in, kg-cmN-m *Peak, Real TimePeak Down measuring mode (selectable) *800 data memory. *Programmable HighLow set points with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing *Programmable screw tightening counter *Programmable Auto Zero function resets unit to zero for easy operation *Both CWCCW operation *ASCII format output(USB) *Runs on internal NiCad batteries (for 12 hours) Auto shut-off after 10 min. of non-use * AC chargercarrying case included. |
| Specification | DID-4 | |
| Measuring range | 0.020 - 4 N-m | |
| 0.20~40 kgf-cm | ||
| 0.20~35 lbf-in | ||
| Accuracy | ± 0.5% (in case of reading 499 or less = last digit +/- 3 reading) | |
| Display | The 4 figures digital display of LCD | |
| The measurement direction | CW-CCW (rightleft) | |
| Measuring mode | P-P Peak | Holding Peak Load Value |
| T-R Track | Showing Real time torque value ( Used for Zero-Adjustment ) | |
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |
| C Real-time output | Load torque value is outputted every about 1/ 160. | |
| Decision function | Setting of torque value | Programmable HighLow setpoints with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing |
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |
| Data spec. | Data transfer | ASCII format (Baud rate : 19200) When outputting data,the cable(USB miniB) is needed. |
| Data memory | 800 data / ten channels data | |
| A setup of the number of counts | One to 99 count (count in a direction with a bundle) | |
| Power supply | Ni-Cd chargeable battery 1.2V×4cells 600mAh | |
| Auto power save | 10 minutes no use, automatically switch off. | |
| Charging time | From empty - less than 5hours | |
| Continunous working time | 12 hours | |
| Bit /Socket part | HEX6.35 | |
| Weight | about 400g | |
| Attachment | Bit (+)?。#薄。#病?/td> | |
| Accessories (one piece each) | Dedicated AC/DC Adaptor (Charger),100~230VAC | |
| An inspection report, a proofreading certificate, a traceability system figure | ||




































广平县|
施秉县|
望城县|
舞阳县|
海口市|
隆尧县|
杨浦区|
韶关市|
常德市|
新闻|
朔州市|
泗阳县|
朔州市|
栖霞市|
永清县|
广安市|
河池市|
灵璧县|
获嘉县|
和林格尔县|
集贤县|
江孜县|
桂林市|
基隆市|
烟台市|
德安县|
浪卡子县|
惠州市|
西贡区|
子洲县|
上饶县|
阆中市|
遂溪县|
泊头市|
浮山县|
句容市|
利津县|
青海省|
织金县|
广汉市|
社旗县|