出廠檢驗報告

Inspect Report

報告編號:                          第 1 頁,  共  4 頁

Report No.                           page        of

客戶名稱:

Customer’s Name:   

儀器名稱:

Apparatus Name:  灼熱絲試驗儀

型號規格:

Type specification: ZRS-H

儀器編號:

Apparatus No.: 

檢驗結論:

Inspect Result: 合     格

制造廠商:

Manufacturer:      深圳市德邁盛C測控設備有限公司

核  驗:

Inspected by:

檢驗員:

Inspected by:

檢驗日期:                       年     月    日

Inspect Date:                     Y      M    D

說    明

                DIRECTIONS           

                                     第 2頁,  共 3頁

                                                          Page       Of

• 本公司檢驗方法符合ISO 9001(2000版)質量系統

The test method is conformed with ISO 9001(2000Edition) Quality System

• 本報告未經簽章無效,資料涂改無效.

Without signature , the report will be null and valid. And alteration will caused the date invalid.

• 客戶可自由使用本報告,但須整份使用,不得任意摘錄.檢測結果僅對受校儀器當時之情況負責,受檢儀器檢測后之準確度,則視往后使用之小心程度及使用之頻率而定.

The report can be used freely , but it should be used whole. The testing results are only responsible for the performance of equipment at the test moment. The precision must according to the degree of carefulness and the frequency of use.

• 本次檢驗的技術依據: 

Reference documents for the test:

• 本次檢測所使用的主要計量標準器具:

Main measure apparatus is used in test:

器具名稱/型號                  編號               證書號

Name of apparatus               Serial No.           Certificate No.

溫度校正儀：             

秒表：

數顯卡尺：

拉力計

6.檢驗地點,環境條件:

Inspect place and Environment condition.

地點:                        溫度:                    相對濕度:

Place:                        Temperature:               RH:

公司地址: 廣東省深圳市*園科苑路10號

郵政編號:                                    Post Cade:

檢   驗   結   果

Results  of  calibration

第 3頁, 共3 頁

                                                                 Page      of

.

 報告編號:                                        :                   

 Report No                                             Record No.                     

檢驗結果:

• 外觀:   合格

2.配件:   齊全

3.功能:   正常

4.各項技術指標的檢測結果如下:

4.1溫度示值誤差測量:

4.2試驗力示值誤差測量:

4.3 小車速度示值誤差

4.4 試驗時間：

4.4 試驗容積：