工業生產常用的幾種傳動方式比較幾種常見的傳動方式、性能比較冷卻塔皮帶5/11M800SPL工業生產常用的幾種傳動方式比較 COMPARE SEVERAL COMMON'S POWER TRANSMISSION PROPERTY 性能 Property 同步帶 synchronous belt 三角帶 Vbelt 平皮帶 Flat belt 鏈帶 Chain 齒輪 Gear 同步帶傳動具有本性能的原因比較 Reason 傳動確定,無滑移 Driving determined&no slip 好 Good 差 Bad 差 Bad 好 Good 好 Good 帶齒與輪齒嚙合傳動,中心骨架保證節距不變,傳動基本不依靠摩擦。比較 belt&pulley bite transmission the center backbone proof the pitch transmission do'tdepend on friction 瞬時速度均勻,同步性好 Instantaneous speed unifom&good synchronous prperty 好 Good 差 Bad 差 Bad 差 Bad 好 Good 速比范圍 Speed ratio range 大 Large 大 Large 中 Medium 大 Large 中 Medium 允許線速度 Allowable linear speed 高 High 中 Medium 中 Medium 低 Low 中 Medium 質輕、帶薄、柔韌性好、抗張強度高 light thin good snappy&high tensile energy 傳動噪聲 Transmission noise 小 Small 小 Small 小 Small 小 Small 中 Medium 傳動接觸為橡膠與金屬 transmisson contact is rubber&metal 功率/重量比值 Power/proportion byweight 大 Large 中 Medium 中 Medium 小 Small 中 Medium 膠帶薄而韌,傳動中心距短,帶輪直徑小,可用塑料及輕金屬 belt thin T snappy short center distance,small diameter of pulley,can use plastics T ligh-metal 傳遞功率 Transmission power 中 Medium 中 Medium 中 Medium 中 Medium 大 Large 受橡膠及中心骨架層強度的限制 siffer ribber Tcemter baclbpme's limited 效率 Efficiency 98%-99.5% 85%-95% 85%-95% 96%-98% 98%-99% 滑動摩擦損失少 can silp,little friction lose 初張緊力 Intial tension 小 Small 大 Large 大 Large 小 Small - 不依靠摩擦傳動,不需很大張緊力 do'tdepend friction,do'tneed big tension 軸承壓力 Bear pressure 小 Small 大 Large 大 Large 小 Small 小 Small 初張緊力小 initial tension is small 突然超載及耐沖擊性能 Abrupt over load&shock resistance 中 Medium 好 Good 好 Good 差 Bad 中 Medium 彈性體能吸收沖擊 elastomer sink impulse 低速時轉矩大、不需潤滑 Large torque of lower speed,without lubrication 好 Good 好 Good 好 Good 差 Bad 差 Bad 傳動接觸為橡膠與金屬 transmisson contact is rubber&metal 壽命 Life 長 Long 長 Long 長 Long 中 Medium 長 Long 耐磨損 abrasion durability 維修 Service 簡便 Easy 簡便 Easy 簡便 Easy 尚簡便 Charge 不方便 Charge 系標準件,更換方便 standant body,easy to change 防污穢和灰塵 Anti-fouling&dust 好 Good 好 Good 好 Good 中 Medium 差 Bad 橡膠材料特點 rubber material feature 安裝誤差對傳動性能影響 Effect of install-ation error 大 Large 中 Medium 小 Small 中 Medium 大 Large 兩軸平行度要求高,必要時可裝張緊輪調整