代碼
275顯示信息
可能的故障
A1
EEPROM Checksum - Core Processor
流量計需要返修
 
A2
RAM Error - Core Processor
重新上電/流量計需要返修
A3
Sensor failure
檢查測試點
A4
Temperature out of range
檢查測試點
A5
Input over range
檢查測試點
 
A6
Field device not characterizeded
檢查特性化. 特別要檢查FCF和K1值
A7
Real time interrupt failure
流量計需要返修
 
A8
Density outside limits
檢查測試點
A9
Field device warming up
流量計預熱
 
A10
Calibration failed
重新上電， 然后重新標定
A11
Excess calibration correction, zero too low
重新上電， 然后重新調零
 
A12
Excess calibration correction, zero too high
重新上電， 然后重新調零
A13
Process too noisy to perform auto zero
消除或降低干擾， 重新調零
A14
Electronics failure
變送器需要返修
A15
Data loss possible
重新上電，檢查組態數據
A16
Line RTD Overrange
檢查測試點
A17
Case RTD Overrange
檢查測試點
 
A18
EEPROM Checksum － 1000/2000
變送器需要返修