|  優點 更準確的測量結果 高采樣率和長存儲 快速發現異常信號 基于創新的數字觸發系統,準確觸發 基于單核A/D轉換器,精確測量 在1mv/div量程下仍可大膽全帶寬 更豐富功能,更快速得到測量結果 測量速度快,即使復雜的分析功能仍能確??焖贉y量 豐富的測量功能 QuickMeas: 一鍵操作得到關鍵參數的測量結果 歷史模式: 往回查看歷史波形 模板測試:極快捷的設置 FFT: 分析信號頻域的便利方式 更愉悅測量 直觀,智能化的用戶指引 全定制化的顯示 高分辨率的觸摸屏 快捷鍵進入重要工具 指尖放大信號細節 帶有MSO選件,支持邏輯分析 可以看清更多信號細節,在存儲深度下仍能保持采樣率, 精確觸發感興趣的事件 以的捕獲率和分析速度快速發現錯誤信號 直觀顯示數字信號 的分析功能 即使是數字通道也支持串行協議分析 由于采用有源探頭的解決方案,負載效應很小 串行協議:方便地進行觸發和解碼 快速測量配置 隔離協議事件 清晰顯示數據 高捕獲率,快速發現錯誤 電源分析 以操作向?qū)У姆绞娇焖俚玫綔y量結果 遵循行業標準對電流諧波限制 清晰簡潔的測量報告 可對電流和電壓采樣原理不一樣導致的通道之間的延遲進行補償 基于示波器的EMI調試 用于研發階段的EMI測試 高動態范圍和靈敏度 對偶發性的輻射也具備洞察力 對時域和頻域進行關聯 高性能探頭,配有種類齊全的附件 Rohde & Schwarz 探頭家族 優異的指標確保了信號保真度 易于操作:基于人體工程學原理設計; 結實耐用 探頭上面的微小按鈕,便于對示波器的遙控 R&S®ProbeMeter: 集成了電壓表功能,便于精確的DC測量 易于擴展升級性,帶來投資保護 用戶可輕松地對硬件選件進行本地安裝 軟件滿足廣泛的應用需求 Firmware 免費升級 帶寬可升級 | Vertical system | | Number of channels | R&S®RTE1022/R&S®RTE1032/R&S®RTE1052/R&S®RTE1102 | 2 | | | R&S®RTE1024/R&S®RTE1034/R&S®RTE1054/R&S®RTE1104 | 4 | | Analog bandwidth (–3 dB) at 50 Ω | R&S®RTE1022/R&S®RTE1024 | ≥ 200 MHz | | | R&S®RTE1032/R&S®RTE1034 | ≥ 350 MHz | | | R&S®RTE1052/R&S®RTE1054 | ≥ 500 MHz | | | R&S®RTE1102/R&S®RTE1104 | ≥ 1 GHz | | Rise time | R&S®RTE1022/R&S®RTE1024 | < 1,75 ns | | | R&S®RTE1032/R&S®RTE1034 | < 1 ns | | | R&S®RTE1052/R&S®RTE1054 | < 700 ps | | | R&S®RTE1102/R&S®RTE1104 | < 350 ps | | Impedance | | 50 Ω ± 1,5 %, 1 MΩ ± 1 % || 16 pF ± 1 pF(meas.) | | Input sensitivity | max. bandwidth in all ranges | 50 Ω: 1 mV/div to 1 V/div 1 MΩ: 1 mV/div to 10 V/div | | ENOB of A/D converter | full-scale sine wave, < –3 dB frequency bandwidth | > 7 bit (meas.) | | Acquisition system | | Realtime sampling rate | | max. 5 Gsample/s on each channel | | Acquisition memory | standard configuration, per channel/1 channel active | R&S®RTE 2-channel model: 10/20 Msample R&S®RTE 4-channel model: 10/40 Msample | | | max. upgrade (R&S®RTE-B102option), per channel/1 channel active | R&S®RTE 2-channel model: 50/100 Msample R&S®RTE 4-channel model: 50/200 Msample | | Acquisition rate | | > 1 000 000 waveforms/s | | Decimation modes | any combination of decimation mode and waveform arithmetics | sample, peak detect, high resolution, root mean square | | Waveform arithmetics | | Off, Envelope, Average | | Interpolation modes | | linear, sin(x)/x, sample & hold | | Horizontal system | | Timebase range | | 50 ps/div bis 50 s/div | | Timebase accuracy | after delivery/calibration | ±5 ppm | | Channel deskew | | ±100 ns | | Trigger system | | Trigger types | | edge, glitch, width, runt, window, timeout, interval, slew rate, data2clock, pattern, state, serial pattern, TV/video, serial bus trigger (optional) | | Sensitivity | definition of trigger hysteresis | can be set automatically or manually from 0 div to 5 div | | Analysis and measurement functions | | Automated measurements | | 78 measurement functions | | Cursor measurements | | 2 cursor sets, each consisting of two horizontal and two vertical cursors | | Waveform mathematics | | 4 math waveforms; mathematics, logical operations, comparison, FIR filter, FFT | | MSO option | | Digital channels | | 16 (2 logic probes) | | Input impedance | | 100 k || 4 pF | | Sampling rate | | 5 Gsample/s per channel | | Acquisition memory | | 100 Msample per channel | | Parallel buses | | up to 4 | | General data | | Dimensions | W x H x D | 427 mm × 249 mm × 204 mm (16.81 in × 9.8 in × 8.03 in) | | Weight | without options, nominal | 8,8 kg (19.4 lb) | | Screen | | 10.4" LC TFT color touchscreen, 1024 × 728 pixel (XGA) | | Interfaces | | 1 Gbps LAN, 4 × USB 2.0, GPIB (optional), DVI for external monitor, external trigger, trigger output | | Models | | | | R&S®RTE1022 | 1317.2500.22 | | | | R&S®RTE1024 | 1317.2500.24 | | | | R&S®RTE1032 | 1317.2500.32 | | | | R&S®RTE1034 | 1317.2500.34 | | | | R&S®RTE1052 | 1317.2500.52 | | | | R&S®RTE1054 | 1317.2500.54 | | | | R&S®RTE1102 | 1317.2500.02 | | | | R&S®RTE1104 | 1317.2500.04 | | Hardware Options | | | 混合信號選件,400MHz 5GS/s,16通道,100Mpts/ch的存儲深度 | R&S®RTE-B1 | 1317.4961.02 | | | GPIB Interface | R&S®RTE-B10 | 1317.4978.02 | | | Replacement SSD Hard Disk, incl. firmware | R&S®RTE-B18 | 1317.7002.02 | | | Replacement Hard Disk, incl. firmware | R&S®RTE-B19 | 1317.7019.02 | | | Memory Upgrade, 20 Msample per channel | R&S®RTE-B101 | 1317.7331.02 | | | Memory Upgrade, 50 Msample per channel | R&S®RTE-B102 | 1317.7348.02 | | | Upgrade of the R&S®RTE1022/4 to 350 MHz bandwidth, incl. calibration | R&S®RTE-B200 | 1317.7254.02 | | | Upgrade of the R&S®RTE1022/4 to 500 MHz bandwidth, incl. calibration | R&S®RTE-B201 | 1317.7260.02 | | | Upgrade of the R&S®RTE1022/4 to 1 GHz bandwidth, incl. calibration | R&S®RTE-B202 | 1317.7277.02 | | | Upgrade of the R&S®RTE1032/4 to 500 MHz bandwidth, incl. calibration | R&S®RTE-B204 | 1317.7283.02 | | | Upgrade of the R&S®RTE1032/4 to 1 GHz bandwidth, incl. calibration | R&S®RTE-B205 | 1317.7290.02 | | | Upgrade of the R&S®RTE1052/4 to 1 GHz bandwidth, incl. calibration | R&S®RTE-B207 | 1317.7302.02 | | Software Options | | | I2C/SPI Serial Triggering and Decoding | R&S®RTE-K1 | 1317.7125.02 | | | UART/RS-232 Serial Triggering and Decoding | R&S®RTE-K2 | 1317.7131.02 | | | CAN/LIN Serial Triggering and Decoding | R&S®RTE-K3 | 1317.7148.02 | | | FlexRay™ Serial Triggering and Decoding | R&S®RTE-K4 | 1317.7154.02 | | | I2S/LJ/RJ/TDM Serial Triggering and Decoding | R&S®RTE-K5 | 1317.7160.02 | | | MIL-1553 Serial Triggering and Decoding | R&S®RTE-K6 | 1325.9781.02 | | | ARINC 429 Serial Triggering and Decoding | R&S®RTE-K7 | 1325.9798.02 | | | Power Analysis | R&S®RTE-K31 | 1317.7177.02 | | Probes | | | 500 MHz, passive, 10 :1, 10 MΩ II 9.5 pF, max. 400 V | R&S®RT-ZP10 | 1409.7550.00 | | | 400MHz,無源,高壓,100:1,50 MΩ, 7.5 pF, 1 kV RMS | R&S®RT-ZH10 | 1409.7720.02 | | | 400MHz,無源,高壓,1000:1,50 MΩ, 7.5 pF, 1 kV RMS | R&S®RT-ZH11 | 1409.7737.02 | | | 1.0 GHz, active, 1 MΩ II 0.8 pF | R&S®RT-ZS10E | 1418.7007.02 | | | 1.0 GHz, active, 1 MΩ II 0.8 pF, R&S®ProbeMeter, micro button | R&S®RT-ZS10 | 1410.4080.02 | | | 1.5 GHz, active, 1 MΩ II 0.8 pF, R&S®ProbeMeter, micro button | R&S®RT-ZS20 | 1410.3502.02 | | | 100 MHz, 無源, 主動, 差分, 8 MΩ, 3.5 pF, 1 kV (eff) (CAT III) | R&S®RT-ZD01 | 1422.0703.02 | | | 1.0 GHz, active, differential, 1 MΩ II 0.6 pF, R&S®ProbeMeter, micro butten, incl. 10.1 external attenuator, 1.3 pF, 70 V DC,46 V AC (peak), | R&S®RT-ZD10 | 1410.4715.02 | | | 1.5GHz,主動,差分,1 MΩ, 0.6 pF,微型按鈕 | R&S®RT-ZD20 | 1410.4409.02 | | | 10 MHz, current, AC/DC, 0.01 V/A, 150 A (RMS) | R&S®RT-ZC10 | 1409.7750.02 | | | 100 MHz, current, AC/DC, 0.1 V/A, 30 A (RMS) | R&S®RT-ZC20 | 1409.7766.02 | | Probe accessories | | | Accessory Set for R&S®RT-ZP10 passive probe (2.5 mm probe tip) | R&S®RT-ZA1 | 1409.7566.00 | | | Spare Accessory Set forR&S®RT-ZS10/R&S®RT-ZS10E/R&S®RT-ZS20/R&S®RT-ZS30 | R&S®RT-ZA2 | 1416.0405.02 | | | Pin set forR&S®RT-ZS10/R&S®RT-ZS10E/R&S®RT-ZS20/R&S®RT-ZS30 | R&S®RT-ZA3 | 1416.0411.02 | | | Mini Clips | R&S®RT-ZA4 | 1416.0428.02 | | | Micro Clips | R&S®RT-ZA5 | 1416.0434.02 | | | Lead Set | R&S®RT-ZA6 | 1416.0440.02 | | | R&S®RT-ZD20/R&S®RT-ZD30差分探頭附件探針 | R&S®RT-ZA7 | 1417.0609.02 | | | SMA Adapter | R&S®RT-ZA10 | 1416.0457.02 | | | Probe Power Supply | R&S®RT-ZA13 | 1409.7789.02 | | | External Attenuator, 10:1, 2.0 GHz, 70 V DC, 46 V AC (peak) | R&S®RT-ZA15 | 1410.4744.02 | | Accessories | | | Front Cover | R&S®RTO-Z1 | 1317.6970.02 | | | Soft Case, for R&S®RTO digital oscilloscopes and accessories | R&S®RTO-Z3 | 1304.9118.02 | | | Transit case for R&S®RTO/RTE oscilloscopes and accessories | R&S®RTO-Z4 | 1317.7025.02 | | | Probe Pouch, for R&S®RTO digital oscilloscopes | R&S®RTO-Z5 | 1317.7031.02 | | | Probe Deskew and Calibration Test Fixture | R&S®RT-ZF20 | 1800.0004.02 | | | Rackmount Kit | R&S®ZZA-RTO | 1304.8286.00 | 歡迎您訪問深圳市宏美瑞科技有限公司【】,如需了解更詳細的產品信息,請給我們在線留言,我們會及時回復您的信息。如有任何的疑問,您可以致電給我們,我們一定會盡心盡力為您提供優質的服務. 羅德與施瓦茨相關其它產品: R&S®SMC100A 信號發生器 R&S®FSH4/8/13/20 手持式頻譜分析儀 R&S®RTE 數字示波器 R&S®RTO 數字示波器 R&S®RTM1000 數字示波器 |