DCS系統技術說明書

DCS system technical specification

系統介紹/System introduction

DCS是分散控制系統（Distributed  Control  System）的簡稱，國內一般習慣稱為集散控制系統。它是一個由過程控制級和過程監控級組成的以通信網絡為紐帶的多級計算機系統，綜合了計算機（Computer）、通訊（Communication）、顯示（CRT）和控制（Control）等4C技術，其基本思想是分散控制、集中操作、分級管理、配置靈活、組態方便。
    DCS is the short for Distributed Control System (Distributed Control System), and it is commonly called distributed control system in China. It is a multilevel Computer system composed of process Control level and process monitoring level with Communication network as the link, integrating computer (Computer), communication (Communication), display (CRT) and control (Control) etc. The basic idea is decentralized control, centralized operation, hierarchical management, flexible configuration and convenient configuration.

系統的主要技術特點概述/The main technical characteristics of the system are summarized

1、系統主要有現場控制站（I/O站）、數據通訊系統、人機接口單元（操作員站OPS、工程師站ENS）、機柜、電源等組成。系統具備開放的體系結構，可以提供多層開放數據接口。

The system mainly consists of field control station (I/O station), data communication system, man-machine interface unit (operator station OPS, engineer station ENS), cabinet, power supply and so on. The system has an open architecture and can provide multi-layer open data interface.

2、硬件系統在惡劣的工業現場具有高度的可靠性、維修方便、工藝。底層漢化的軟件平臺具備*的處理功能，并提供方便的組態復雜控制系統的能力與用戶自主開發專用高級控制算法的支持能力；易于組態，易于使用。支持多種現場總線標準以便適應未來的擴充需要。

The hardware system has high reliability, easy maintenance and advanced technology in harsh industrial sites. The underlying Chinese software platform has powerful processing functions, and provides convenient configuration of complex control systems and users to develop special advanced control algorithms. Easy to configure, easy to use. Multiple fieldbus standards are supported to accommodate future extensions.

3、系統的設計采用合適的冗余配置和診斷至模件級的自診斷功能，具有高度的可靠性。系統內任一組件發生故障，均不會影響整個系統的工作。

The design of the system adopts suitable redundancy configuration and self-diagnosis function from diagnosis to module level, which has high reliability. The failure of any component in the system will not affect the work of the entire system.

4、系統的參數、報警、自診斷及其他管理功能高度集中在CRT上顯示和在打印機上打印，控制系統在功能和物理上真正分散，DCS·整個系統的可利用率至少為99.9％；系統平均時間為10萬小時，實現了核電、火電、熱電、石化、化工、冶金、建材諸多領域的完整監控。

The parameters, alarm, self-diagnosis and other management functions of the system are highly concentrated on the CRT display and printed on the printer, the control system is really dispersed in function and physics, and the utilization rate of DCS and the whole system is at least 99.9%; The average trouble-free time of the system is 100,000 hours, which realizes the complete monitoring of nuclear power, thermal power, petrochemical, chemical, metallurgy and building materials.

5、域”的概念：把大型控制系統用高速實時冗余網絡分成若干相對獨立的分系統，一個分系統構成一個域，各域共享管理和操作數據，而每個域內又是一個功能完整的DCS系統，以便更好的滿足用戶的使用。

The concept of "domain" : the large-scale control system is divided into a number of relatively independent sub-systems with high-speed real-time redundant networks, a sub-system constitutes a domain, each domain shares management and operation data, and each domain is a fully functional DCS system in order to better meet the use of users.

6、網絡結構可靠性、開放性及性。在系統操作層，采用冗余的100Mbps以太網；在控制層，采用冗余的100Mbps工業以太網，保證系統的可靠性；在現場信號處理層，12Mbps的PROFIBUS總線連接控制單元和各現場信號處理模塊。

Network structure reliability, openness and advanced nature. In the system operation layer, redundant 100Mbps Ethernet is used; In the control layer, the redundant 100Mbps industrial Ethernet is used to ensure the reliability of the system. In the field signal processing layer, the 12Mbps PROFIBUS bus connects the central control unit and the various field signal processing modules.

7、標準的Client/Server結構。有的DCS的操作層采用Client/Server結構，開放并且可靠的操作系統。系統的操作層采用WINDOWS NT操作系統；控制站采用成熟的嵌入式實時多任務操作系統QNS以確?？刂葡到y(tǒng)的實時性、安全性和可靠性。

Standard Client/Server architecture. Some DCS operating layer adopts Client/Server structure, open and reliable operating system. The operating layer of the system adopts WINDOWS NT operating system. The control station adopts the mature embedded real-time multi-task operating system QNS to ensure the real-time, security and reliability of the control system.

8、標準的控制組態軟件。系統采用IEC61131－3標準的控制組態工具，可以實現任何監測、控制要求?？蓴U展性和可裁剪性，保證經濟性。

Standard control configuration software. The system adopts IEC61131-3 standard control configuration tool, which can realize any monitoring and control requirements. Scalability and tailoring to ensure economy.

DCS一般控制規模/DCS generally controls scale

1、輸入/輸出信號類型/Input/output signal type

DCS的過程控制器應能直接接收或處理以下各種類型的輸入和輸出信號，包括模擬量輸入、數字量輸入、模擬擬量輸出。數字量輸出。

The DCS process controller should be able to directly receive or process the following types of input and output signals, including analog input, digital input, analog analog output. Digital output.

2、DCS系統功能要求/Functional requirements of DCS system

2.1、系統一般具備有控制功能、連續控制、離散控制功能、系統監視功能、監控軟件功能包括總貌畫面、分組畫面。趨勢畫面，報警畫面、圖形畫面、棒圖等。

The system generally has control function, continuous control, discrete control function, system monitoring function, monitoring software function including the overall picture, grouping picture. Trend screen, alarm screen, graphic screen, bar chart, etc.

2.2、報警功能/Alarm function

當報警發生時，系統將具有以下動作，一、系統將根據報警的級別和設置實時打印當前的報警內容；二、同時系統產生聲響報警，并提供報警顏色的變化，用以提示操作者。報警類型至少具有下列類型，高報、低報、高高報、低低報、偏差報等。三、當要求聯鎖控制時應具備聯鎖功能，聯鎖控制功能包括布爾邏輯和梯形邏輯。

When the alarm occurs, the system will have the following actions, first, the system will print the current alarm content in real time according to the alarm level and setting; At the same time, the system generates an audible alarm and provides a change in the alarm color to prompt the operator. Alarm types have at least the following types, high report, low report, high report, low report, deviation report and so on. Third, when the interlock control is required, it should have an interlock function, and the interlock control function includes Boolean logic and ladder logic.