| 耦合方式:電容耦合 | Coupling method: capacitor coupling |
| 耦合電容:9μF(共模試驗) 18μF(差模試驗) | Coupling capacitor: 9μF(common mode test) 18μF(normal mode test) |
| 去耦電感:1.5mH | Decoupling inductor: 1.5mH |
主要技術參數 Specifications
| 項 目 Item | SGN-5010A | SGN-5010B | SGN-20 |
| 耦合的浪涌波形 Surge waveform coupled | 綜合波(1.2/50μs電壓波,8/20μs電流波) Combination waveform(1.2/50μs voltage waveform, 8/20μs current waveform) | ||
| 輸入浪涌電壓 Max. input voltage waveform | 6.6kV | ||
| 輸入浪涌電流 Max. input current waveform | 3.3kA | ||
| 耦合方式選擇 Coupling mode choice | 手動操作 Manual operation | ||
| 被試設備容量 Power capacity of EUT | 單相,3線,220V,10A Single phase, 3 wire, 220V, 10A | 單相,3線,220V,20A Single phase, 3 wire, 220V, 20A | 三相,5線,380V,20A Three phase, 5 wire, 380V, 20A |
| 未加浪涌線上的殘余電壓 The residual surge voltage on unsurged line | 試品不接時,殘余電壓不超過所施試驗電壓的15% Not exceed 15% of the max. applicable test voltage when EUT is disconnected | ||
| 電源線入口接的殘余電壓 The residual surge voltage on the power supply input of the decoupling network | 試品不接時,殘余電壓不超過所施試驗電壓的15%或電源線峰值電壓兩倍 Not exceed 15% of the max. applicable test voltage when EUT is disconnected or twice for peak &#118alue of the power line voltage whichever is higher | ||
| 工作電源 Power in | AC 220V 50/60Hz | ||
| 環境溫度 Operating temp. | 15℃-35℃ | ||
| 重量 Weight | 25kg | 35kg | |
| 外形尺寸 Dimensions (D×W×H)mm | 460*520*240 | 460*520*310 | |

































阿拉善右旗|
宝清县|
象州县|
乌拉特后旗|
车致|
隆化县|
海淀区|
双桥区|
临海市|
天峻县|
博爱县|
油尖旺区|
彝良县|
武平县|
岑溪市|
介休市|
泰兴市|
石柱|
金华市|
桂阳县|
洛宁县|
子洲县|
孟连|
东台市|
建德市|
禹州市|
北票市|
喀喇沁旗|
三江|
武夷山市|
大丰市|
东阿县|
肥西县|
蛟河市|
西乡县|
年辖:市辖区|
星座|
天峻县|
乐平市|
长治县|
资溪县|