德國OPTOLOGIC測速儀

Model ASCOspeed 5500 Measuring range 1-3000 m/min Reference distance 300 ±15mm 300 ±30mm 1) Linearity ± 0.05% 2) 4) Repeatability ± 0.03% 3) 4) Resolution 0.1mm / 0.001 m/min Update-time (least averaging-time) 0.5ms Light source Power-LED (safety class 1) Signal conditioning compact housing with integral electronics Protection class IP65 (suitable for cold-rolling-mill application by using the stainless steel protective housing with air-purging and viton-seams) Vibration (DIN EN 60068-2-6) 2g / 20 … 500Hz, sinoidal Shock (DIN EN 60068-2-29) 15g / 6ms, half sinoidal Operating temperature 0°C to 50°C (without external cooling) Storage temperature -20°C to 70°C Output Standard: 2 encoder outputs (A, B, /A, /B), 3 alarm, 3 status Optional: 2 further encoder outputs (A, B, /A, /B), synchronisation output; analogue output (4 - 20mA) All outputs opto-insulated Digital Data-Interfaces Standard: 1x RS232 (Service or parameterization interface) Optional: 1x RS232, 1x RS232 o. RS422 (switchable) Optional: EtherCAT-ready (compatible with Beckhoff EL6021/KL6041) All serial interfaces are optically isolated Input Standard: Direction- and trigger inputs Optional: 3 further control- or pulse inputs All inputs optically coupled with current delimiter resistors LED 1. Signal (LED green/red) 2. Busy (yellow) 3. Error (red) Power supply 24VDC ± 15% / P < 50W Weight 5.6kg 1) Extended measuring distance with restricted measurement uncertainty of 0.1% 2) Deviation of the sensor characteristic for speed respectively length from a straight line, bigger than 15 m/s extended area with 0,1 % 3) Statistical probability 2 sigma, distribution measured at 5 m/s 4) Testing condition: metal surface, 10 m reference length, basic measuring distance 300 mm, temperature = 20 °C (constant), tilting less than 0,1 degree

德國OPTOLOGIC測速儀

標準:方向和觸發輸入

可選:3進一步控制或脈沖輸入

所有輸入與電流定界電阻耦合

1。信號(LED綠色/紅色)2。忙(黃色)3。錯誤(紅色)

電源24 vdc / P < 50 w±15%

體重5.6公斤

1)延長測量距離，測量不確定度為0.1%

2)傳感器特性與直線距離的偏差，大于15m / s擴展面積為0，為1%

3)統計概率2西格瑪，分布以5米/秒測量

4)測試條件:金屬表面,10 m參考長度、基本測量距離300 mm,溫度= 20°C(常數),

傾斜小于0,1度